First of all, the concrete can also be used on the ground of the drill milling machine, and it can also be made of wood and steel. The drilling and milling machine must be flat and robust. When the device is out, the adjusting screw is screwed out, the drill and milling machine is placed on the load plate of the iron pad, and then the screw is screwed in from the top. Adjust the guide horizontal drilling and milling machine, drilling and milling machine rotates clockwise when rise, counterclockwise when drilling and milling machine is reduced, after adjusting nut. In the area of "drilling and milling machine", if the height difference of the ground plane exceeds the conditioning scale of the commodity, the gasket can be added between the drill milling machine and the load plate. Creep rubber appearance of shock proof pad iron for drilling and milling machine.
An inclined plane is a plane that must be a point where the datum plane of the workpiece becomes oblique. The machine tool workpiece is installed as a request point of view, and when the horizontal milling machine or the vertical milling machine can not roll the view point on the vertical milling machine, when milling the inclined plane, the workpiece can be made into a request viewpoint to mill the inclined plane. Drilling, milling machines, milling machines are commonly used in the following ways:
(1) switch machine vise body equipped with clamp clamping device of machine vision, the first is fixed jaw and drilling milling machine, milling machine spindle axis vertical or parallel, and then through the clamp on the base line, will be transferred to the clamp body to milling machine tool workpiece clamping point, bevel milling request. In the machine tool, the fixed jaw and the spindle axis are straight first, then the a angle of the clamp body is adjusted, and the inclined plane is milled with the end milling cutter. First, the fixed jaw is parallel with the spindle axis, then the D angle of the clamp body is adjusted, and the bevel is milled with the end milling cutter or face milling cutter.
(2) on the workpiece shape of workpiece with large size by the iron clamp, the first device in the work table on a piece of iron askew, a side surface to the workpiece by iron datum plate for clamping the workpiece, with surface milling for the inclined plane.
(3) with tilting pad iron workpiece clamping workpiece production quantity, for clamping and aligning workpieces can be convenient, after the wedges, the workpiece is clamped on the machine vise, inclined plane milling request. The width of iron pad selected by drilling, milling machine and milling machine should be less than the width of the workpiece.
(4) in accordance with the line clamping workpiece can be in single piece production, drilling and milling machine, milling machine workpiece draw bevel processing line, with machine vise clamping workpiece with tosecan is drawn on a workpiece processing line and the work table is parallel with a cylindrical milling cutter or face milling cutter milling bevel.
